newtop
Date Posted : 2018-07-12

Licensed 310s Automotive Technician

Job Overview

Skills and Qualifications

Grade 12 diploma or GED.
Automotive Service Technician, fully licensed (310S or higher).
Proven knowledge and experience with automotive mechanical operations.
Must be team oriented with a positive attitude.Work well under pressure in a fast-paced environment.
Must be reliable and able to work productively with minimal supervision.

Additional Details

We are currently looking for a Licensed Automotive Technician 310S to join one of our busiest, high volume and dynamic Niagara Service teams.
The successful candidate will be passionate about automotive repair, have their 310s certification, and a team player!
They will be responsible for inspecting and diagnosing problems, providing repairs and maintenance to all types of new and used vehicles, and seen as a point of support and leadership for Apprentice Technicians.
If employment and excellent earning potential in one of the best regions Ontario has to offer with one of Ontario’s leading and fastest growing Automotive groups. A group representing over 29 locations, and many of which are top performers, interests you.

Essential Job Duties and Responsibilities

Project a positive attitude for the benefit of our customers and our junior employees.

Retrieve repair orders from dispatch on a timely basis.

Obtain parts from the Parts Department as required.

Use repair order punch clock appropriately, (i.e. punch onto specific line when starting task, and punch off when task is complete).

Road test vehicles as required.

Address all customer concerns using the Three C’s method – Complaint, Cause, Correction.

Examine all vehicles to determine if additional safety or service work is required.

Prepare a complete report on the back of the repair order.

Estimate flat rate times for each recommendation. Use supplied flat-rate manuals and the Employer policies as a guide.

Obtain parts prices and note availability for each recommendation.

Perform all work as outlined on the front of the repair order and as authorized on the back, with efficiency and accuracy, and in accordance with company and factory standards.

Order all parts when authorization is received, unless specifically told otherwise. Indicate on the RO that you have done so.

Save and tag parts if the job is under warranty or insurance, or if requested by the customer.

Road-test vehicles after service any time a wheel is removed, or any time a repair that might affect drivability is performed (i.e. tune-up, valve adjustment, brake work, suspension work, rattle/noise repair, etc.). Straight oil changes or transmission fluid changes are excluded.

Ensure that all work performed is thorough, accurate, and completed in a timely fashion.

Work effectively without supervision.

Supervise work of all apprentice technicians or students; report immediately any deficiencies to the Service Manager.

Attend factory-sponsored training classes as scheduled by management.

Attend dealer-specified training courses as scheduled by management.

Keep abreast of all factory technical bulletins.

Learn and understand all current and emerging technologies as they apply to automobile service.

Maintain a high degree of concentration to prevent “comebacks”.

Ensure that customer cars are kept as clean or cleaner than when they arrived, both inside and out.

Keep shop area neat and clean at all times.

Clean bay and bench at the end of each shift.

Dispose of garbage, recycling, etc. as required.

Understand and follow federal, provincial, and local regulations, such as those governing the disposal of hazardous wastes.

Work in strict compliance with the Laws of the Province of Ontario and Canada including, but not limited to, the Employment Standards Act (ESA) and the Accessibilities for Ontarians with Disabilities Act (AODA).

Understand and comply with all federal, provincial and local regulations that affect service operations, such as the Occupational Health and Safety Act (OHSA), waste disposal regulations, etc.

Other duties as required by management.


Skills and Qualifications

Grade 12 diploma or GED.

Automotive Service Technician, fully licensed (310S or higher).

Proven knowledge and experience with automotive mechanical operations.

Must be team oriented with a positive attitude.Work well under pressure in a fast-paced environment.

Must be reliable and able to work productively with minimal supervision.

Ability to read and comprehends instructions and information.

Possesses valid driver's license and a good driving record.

Has a neat appearance, good judgment, and mature attitude.

Personable, reliable, courteous.

Works well in a fast-paced environment. Demonstrate willingness to learn and succeed.

Must be team oriented, reliable and hardworking with a positive attitude.

Excellent diagnostic and electrical skills.

Read, understand, and adhere to all rules, regulations and procedures as required by the Employer.

Obey the laws at all times, including the Occupational Health and Safety Act (OHSA), and the Highway Traffic Act.

Must have valid Class ‘G’ Ontario driver's license and clean drivers abstract.


We Offer:

Flat Rate Compensation & Excellent Earning Potential

Optional Health, Dental and Vision after 3 months.

Manufacturer’s Online Training provided.

Opportunities for Growth and Advancement.


We are a leading automotive company in Southern Ontario with over 1800 employees, 22 brands and 29 locations in Brampton, Brantford, Bolton, Grimsby, Mississauga, Oakville, Orangeville, St. Catharines and Toronto.
We thank all applicants, however only those contacted for an interview will be considered. We are an Equal Opportunity Employer. We welcome applications from people with disabilities. Accommodations will be provided during all parts of the selection process if requested.

Apply today!
Keywords: automotive, technician, 310S, licensed, mechanical, electrical diagnostic, Automotive Mechanic, Auto Mechanic, Automotive Technician, Auto Tech, Shop Mechanic, 310S, Class A mechanic, Ontario, ON, St. Catherines, Hamilton, Stoney Creek, Brampton, Caledon, Vaughan, Concord, Halton Hills, New Tecumseth, Mississauga, Automotive Mechanic, Auto Mechanic, Automotive Technician, Auto Tech, Shop Mechanic, 310S, Class A Mechanic, Automotive Service Technician, Automotive, Technician, 310S, Licensed, Mechanical, Electrical diagnostic, Automotive Mechanic, Auto Mechanic, Automotive Technician, Auto Tech, Auto Shop, Shop Mechanic, 310S, Class A mechanic, Parts, Auto, Auto Parts, Automotive, Mechanic Shop, Customer Service, Shipping, Shipments, Loading, Load, Stock, Stocking, Merchandise, Equipment, Automotive Technician,

To apply for this position please visit http://www.automotivejobsandcareers.ca/jobs/view/1527862309.html

How To Apply

In Person:
TO APPLY FOR THIS POSITION PLEASE COPY AND PASTE THIS LINK AND APPLY



Employer Information
Canada Jobs and Careers
City:
Hamilton
Province:
ON
This job advertisement has been provided by an employer external to ExtremeJobs.ca. ExtremeJobs.ca and Canadian Career Services are not responsible for the accuracy, the authenticity and the reliability of the content.